Connecticut Basement Systems Before & After Photos

Ceramic and vinyl basement tiles leave basement floors cold. They contain no thermal break between the concrete of your floor and your living space. Each ThermalDry Floor Tile rests on top of plastic pegs. By doing so, a thermal break is created underneath, which makes your floor's surface 8-10°F warmer than the cold concrete surface below, and they look great! 

When we came into this Greenwich home, the basement was too cold to be used for anything but storage. Our ThermalDry floor tiles made the floor 8-10 degrees warmer than the concrete underneath. The owners of this home now have a warm, great-looking living space!

This Greenwich, CT home was suffering from a multitude of problems, including a flooding problem in their basement that was beginning to create mold on the home's walls. They called our experts at Connecticut Basement Systems/Total Basement Finishing to take care of the problem! First, we cut and removed the bottom of the walls, to remove any damage that mold may have caused, before beginning our waterproofing process. In order to guide the water out of the home, we first installed our Trench Drain system, so it would be captured upon entrance. To keep the water from seeping through the walls, we made sure to install our WaterGuard drainage channel, and our TripleSafe Sump Pump to make sure that this basement was completely water free! Finally, once the space was completely mold proof, we went ahead and installed Everlast Wall Panels, made from inorganic materials which do not support mold growth. These homeowners can now enjoy their space for years to come!

The homeowners in this Greenwich, CT residence found that their old sump pump wasn't pumping enough water out of the home to keep it dry. The lack of lid was also allowing moisture to seap back into the air, making the space a lot more humid than normal. They decided to call us at Basement Systems to help fix the problem! We went ahead, and replaced their old drainage system with our own, innovative TripleSafe Sump Pump. This three pump system automatically adjusts to meet the basement's pumping requirements, and can carry anywhere from 2,600 to 11,000 gallons per hour. To combat the basement's moisture issues, we installed our SaniDry Basement Dehumidifier to create dry, clean air throughout the entire space. This family is now able to use their basement to its full potential!

These Greenwich homeowners suffered from a damp, dirty basement, and were looking to turn it into a space that they felt much more comfortable spending their time in. They used Connecticut Basement Systems in the past for their sump pump and Sanidry, and we were happy to come and help them with their problems!

Our System Design Specialist, Vin Orsini, came out for a no cost estimate, and quickly diagnosed what this family needed in order to fully maximize the usage of their space. Kryz Wilk and his team came out, and quickly got to work! We installed a WaterGuard around the perimeter of the basement, to ensure any water would drain properly. This goes perfectly with their TripleSafe Sump Pump and Sanidry they already had installed! They also installed a CrawlSpace Vapor Barrier; a bright, durable liner that presents water vapor and humidity from passing through. 

We left this family feeling satisfied and comfortable with their new basement! Give us a call TODAY for your FREE estimate!