Respected Crawl Space & Foundation Repair Pros in Milford, CT

A Milford homeowner was getting water in their basement every time there were heavy rains. With this, they decided to contact us at Connecticut Basement Systems to get a proper solution. After scheduling an appointment, we would send out one of our Sales Consultants, Alex Lopez, to the home. He evaluated the issues throughout the basement and provided them with a solution that would eliminate his problem for good! He informed them that they needed a variety of our waterproofing products/systems to do so.

Then, once all was approved, it would be time for one of our Foremen, Vic Varela, and his crew to install this waterproofing job. The first system installed is our WaterGuard drains. They run below the floor, around the entire perimeter to ensure water is collected from the walls and floors. These then lead directly to the sump pump. Our crew installed our most reliable sump pump, the TripleSafe. It uses 3 pumps to ensure all water is pumped out of the home at a safe distance. These pumps include a primary, a secondary, and a battery backup that can pump out 11,500 gallons of water on a full charge. Our CleanSpace vapor barrier was installed on the walls to lead water from the walls into the drains below. As another layer of protection, our team installed a SaniDry Sedona dehumidifier. This will eliminate the moisture/humidity throughout the basement, as well as prevent mold growth. 

Now, with this complete waterproofing system, this entire basement will stay dry all the time! This customer has great peace of mind knowing they no longer have to worry about their basement during heavy rains! 

A customer in Milford, CT was looking to have their crawlspace encapsulated because of water damage and moisture. They called us at Connecticut Basement Systems to find a permanent solution. We sent one of our Sales Consultants, Mick Foster, to the home to estimate their issues and provide them with a solution to solve this problem for good. 

One of our Foremen, Chavon Bowman, and his crew worked on the installation of this job. The main component of this installation was our CleanSpace vapor barrier. They installed it throughout the entire crawlspace, on the walls and floors. It will act as a vapor barrier to eliminate just odors and ensure there is no moisture coming into this crawlspace. Now it's fresh and clean and the homeowner has peace of mind knowing that this crawlspace will not run into any issues in the future. 

A homeowner in Milford, CT was getting water seepage in their basement through the walls and floors. They called us at Connecticut Basement Systems to have us solve their water problems. One of our Sales Consultants, Rick Raucci, went out to the home to assess the issues and provide them with a proposal for work that they would need to be done. He informed the homeowner that they would need our waterproofing systems to ensure their basement would stay dry. 

Then it would soon be time for one of our Foremen, Krzysztof Wilk, and his crew would install our products/systems in their basement. They installed our WaterGuard drain system around the perimeter of the basement. This collects the water coming in from the walls/floors. It gets installed by jackhammering the floor, placing the WaterGuard down, and covering it with concrete. Then they installed our SuperSump Plus sump pump that will pump out the water collected at a safe distance from the home. To protect the walls and the whole basement from water vapor, they installed a CleanSpace wall system around the basement. Now this basement will stay dry and the homeowner won't have to worry about water seepage again. 

A homeowner in Milford, CT had a foundation that was not properly stabilized. They called us at Connecticut Basement Systems to have us find a solution to this issue. While on a service call, one of our Service Technicians, Mike Furlo, went into the basement to assess the issues and propose a solution that our foundation team would be able to install. He informed them that they would need our SmartJack system to ensure complete stabilization. 

Then it would soon be time for one of our Foremen, Sergio Alves, and Jacob Scott to work on the installation. They installed two supplemental beams to the crawlspace. This would then be supported by 6 SmartJacks. These are jacks that are installed under the supplemental beam to hold it up. Once these SmartJacks are installed, they are then tightened to ensure stability in the foundation and the floor above the crawlspace. How much they tightened the SmartJacks was up to the homeowner and how much stability they wanted. Overall, with the SmartJack system, this floor and house will stay stable and completely supported going forward. 

A homeowner in Milford, CT had water damage in their basement from water seeping in. They called us at Connecticut Basement Systems to find them a proper solution. Once they scheduled an appointment for a free estimate, it would be time for one of our Sales Consultants, Matt Abbassi, to come out to the home to provide them with a proposal for work. He informed the homeowner that they would need our drainage systems and a sump pump so that they would have a dry basement. 

Once the job was approved, it would then be time for one of our Foremen, Al Guglielmoni, and his team to install these systems. 

They installed a WaterGuard perimeter drainage system. This is placed below the floor of the basement so that any water coming in from the walls or floors gets collected properly. A TrenchDrain was installed as well, which is a larger drain, to ensure water coming in through the doorway gets collected. Along with that, they installed a TripleSafe sump pump to collect the drained water and pump it out of the home at a safe distance. The TripleSafe works with three pumps; one primary, one secondary, and one battery backup. This is to ensure that no matter what the circumstance if there is water in the sump pump, it will get pumped out. With these top-of-the-line waterproofing systems, this homeowner will now have a dry basement and no longer have to worry about water damage. 

A homeowner in Milford, CT had a dark and damp crawlspace that was in need of waterproofing, so they called us at Connecticut Basement Systems. After scheduling an appointment, one of our Sales Consultants, Rick Raucci, went to the home to visualize the problem. He let the homeowner know they needed CleanSpace and a SaniDry Sedona Dehumidifier. 

One of our Foremen, Antonio Diaz, and his team would take on this project. They installed the CleanSpace throughout the whole crawlspace to ensure it stays moisture-free and will be protected from water damage. They also installed the Sedona in order to remove moisture from the air and protect the crawlspace from mold growth. These two together will keep this crawlspace is great condition, knowing no water will be getting in. This homeowner was happy with the results, seeing that their crawlspace is going to be nice and dry going forward!

This homeowner in Milford, CT was dealing with water issues in their basement so they called us at Connecticut Basement Systems. One of our Sales Consultants, Rick Raucci, went out to the home and diagnosed the issues. He let them know that they would need our sump pump along with other systems to fully waterproof the space. Our foreman Garfield Sanderson and his team got to work on the installation. They put in the SuperSump Plus, WaterGuard, and TrenchDrain systems. These would collect and drain any water into the sump pump, which would then be pumped outside of the home at a safe distance. The crew also installed CleanSpace walls that would keep water vapor out of the space. Now, this customer can enjoy their completely dry and moisture-free basement!

These homeowners in Milford, CT wanted to transform their unfinished basement. When looking for their finishing solutions they decided it was time to connect with Connecticut Basement Systems. After speaking with Sales Consultant, Cary Benjamin, they were ready for our crew to get to work! Our foreman and their crew began by installing our EverLast Walls to give this basement a beautiful new look. In addition, our crew installed our Sandstone-ThermalDry basement floor tiles to finish the look, so homeowners never have to worry about warping. These homeowners are very satisfied with the exceptional results and eagerly look forward to making the most of their transformed basement!

These homeowners in Milford, CT wanted to simply finish their basement to have another usable living area. When searching for who to call, they decided to call Connecticut Basement Systems! After speaking with Sales Consultant, Cary Benjamin, they were ready to have our Total Basement Finishing team get to work. Our foreman and their team began by installing our EverLast Walls and Sandstone-ThermalDry basement floor tiles to give this basement a vibrant and more luxurious look. The homeowners were thrilled with the work done and eager to finally be able to utilize their basement to its full potential!

Water was a problem for this Milford basement. Every time it rained, the basement would become wet which would leave a gross musty odor. The homeowner was tired of this reoccurring problem and wanted to find a solution. She found out that Connecticut Basement Systems are the experts of all things basementy and decided to set an appointment.

On the day of the appointment, Sales Representative Rick Raucci arrived at the home to inspect the basement. He concluded that a WaterGuard system would surely solve this water problem. To eliminate the musty odor, a SaniDry Sedona was recommended. Rick went over the products and process with the homeowner who decided to move forward with the project.

On the day of installation, Foreman Krzys Wilks and his team installed the products professionally and efficiently. They first installed the WaterGuard System by digging a small trench around the perimeter of the basement walls. The system is then placed inside the drench and then is sealed back up with cement. The system is then hooked up to the sump pump. The water is collected and channeled through the WaterGuard System and is led to the sump pump. The water will then exit the home through a discharge home. Lastly, the SaniDry Sedona was placed and installed, which will collect moisture and reduce the humidity in the area. With low humidity, the musty smell will be eliminated leaving a clean and healthier environment.

The homeowner was very impressed with the outcome of her basement and now can enjoy a healthy and clean basement all year long! 

This Milford basement had water issues that would cause headaches for the homeowner. He was tired of walking into the basement to find water and a musty odor taking over the area. He wanted to find a solution so he decided to set an appointment with Connecticut Basement Systems. 

On the day of the appointment, Sales Representative Rick Raucci arrived at the home to give a free home estimate. He concluded that the best solution for this basement would be to install a WaterGuard System paired with a SaniDry Sedona dehumidifier. Rick explained the benefits of both products. The WaterGuard system is installed internally along the perimeter of the basement. From there it will collect water before it enters the basement and channels it to a sump pump. Once it reaches the sump pump, the water is discharged through an exterior discharge line, keeping the basement completely waterproofed. The SaniDry Sedona dehumidifier will keep humidity low in the basement preventing mold growth and eliminating that musty odor.  The homeowner wanted these products installed and quickly scheduled for an installation date. 

On the day of installation, Krzystof and his production team installed the WaterGuard system and SaniDry Sedona dehumidifier professionally and efficiently. Once the installation was finished, the homeowner was very impressed with the products and was satisfied with the entire experience! Now he does not have to worry about water entering his basement and can enjoy a much healthier environment. 

Water in your basement? Give us a call for a FREE estimate! 1-800-261-3693

Robert P. of Milford, CT wanted a clean, safe space for his kids to play in. He decided to turn his basement from a damp storage area into a finished basement. Robert reached out to Connecticut Basement Systems, and with Basement Finishing specialist Ronald Marra, devised a plan to transform his unfinished basement.

Soon after, foreman Erik Dobrzycki and his crew arrived in Rob’s home. They installed an Everlast perimeter wall system, which is fully washable and is 197% stronger than drywall. This wall system is created with inorganic materials-- materials that will not be damaged by water, and will not support the growth of mold or mildew. Additionally, Erik installed a half bathroom, electrical baseboard heating, a new window, and flooring.

Once the basement was finished, Robert and his family had a beautiful new living space to watch their kids grow up in.